Kawai CP67 manual About Polyphony, Reverb, Effects

ABOUT POLYPHONY

The CP piano is capable of playing up to 96 notes simultaneously (96-note polyphony). When playing in dual mode or when playing the stereo piano sound, the polyphony will be reduced by half since the piano has to produce two sounds for each note.

(6) Reverb

-REVERB adds reverberation to the sound simulating the acoustic environment of a recital room or concert hall.

There are six types of reverb in the CP67. They are Small Room, Medium Room, Large Room, Medium Hall, Large Hall and Plate.

To add reverb to the sound, press the REVERB button. The LED indicator will be turned on. If you hold down the REVERB button for few seconds, the current setting will be shown in the display.

To change the reverb type, use the VALUE buttons while holding down the REVERB button.

The reverb is “ON” when the LED of the REVERB button is lit.

Pressing the REVERB button once again turns the reverb “OFF”.

When the power is turned on, the reverb function is automatically activated.

Small Room Medium Room Large Room Medium Hall Large Hall Plate

(7) Effects

-Adding an effect to the sound enhances tonal quality and improves acoustical realism.

There are twelve types of effect in the CP67. They are Chorus 1, Chorus 2, Chorus 3, Chorus 4, FB Chorus, Tremolo, Rotary 1, Rotary 2, Flanger, Delay 1, Delay 2 and Delay 3.

To add an effect to the sound, press the EFFECTS button. The LED indicator will be turned on and the LED display will show you which effect is currently selected.

To change the effect type, use the VALUE buttons while holding down the EFFECTS button.

Pressing the EFFECTS button once again turns the effect “OFF”.

Chorus 4 FB Chorus Tremolo Rotary 2 Flanger Delay 3

– 13 –