Manuals / Keiser / Power Tools / Air Compressor

Keiser 1030, 1031 manual 2470 S. Cherry Ave Fresno, CA 1800 Fax, e-mail info@keiser.com, Rev A

Models: 1031 1030

1 14

Download 14 pages 33.88 Kb

Page 14

Image 14

2470 S. Cherry Ave.

Fresno, CA 93706

1(800) 888-7009

Fax: (559)256-8100

e-mail:info@keiser.com

www.keiser.com

10-5508 Rev A

Service Department (800) 888-7009

Page 14

Image 14

Keiser 1030, 1031 manual 2470 S. Cherry Ave Fresno, CA 1800 Fax, e-mail info@keiser.com, Rev A, Service Department 800

Contents

WORD DEFINITIONS These items have been provided 8 zip tiesSolenoid Valve Replacement for 1030/1031 Compressor INTRODUCTION remove both screws Step One Dismount valveSolenoid Valve Replacement for 1030/1031 Compressor Unscrew nut counter-clockwise Step Three Remove electrical wiresStep Two Remove hoses cut tubingremove two screws on lid pop out grommet1030 Circuit Board Diagrams Rev A, B, CRev D - Current Service Department 8002 Install single to double splitter and electrical wires There are four steps to Allenair valve installation1 Adjust and mount new valve 3 Secure and tie wires and replace lid 4 Test compressoropen valve counter-clockwise Step One Adjust and mount new valveposition housing on valve turn nut counter-clockwisepush all the way down on elbow secure valve with zip tiesRight side valve Step Two Install single to double adapter and electrical wiresLeft side valve Left side valveRight side valveFront of compressor Step Two Install single to double adapter and electrical wirespush down on board, pull up on connector single to double adapter pull right side wires to grommetattach wires to board zip tie all wires and hoses Step Three Secure and tie wires and replace lidStep Four Test compressor secure wires to center of CGS box10-5508 Rev A Service Department 800feel for air flow e-mail info@keiser.com Service Department 8002470 S. Cherry Ave Fresno, CA 1800 Fax 10-5508 Rev A