Installing The Cabinet Doors
For NG Gas grills:
1.Install the Door Stops to the Bottom Shelf and the Door Bracket. See Fig. 5a.
2.Align the holes on the Door Stops with the threaded holes on the top of the Bottom Shelf and bottom side of Door Bracket. Tighten securely by using 4 of the 1/4"xl/2" Pattern Head Screws provided. See Fig.5a.
3.Remove the white protective film from the stainless steel Doors. Attach a Door Handle to
each Front Door by using 2 of the M4x5mm
Pattern Head Screws provided. See Fig. 5b. Be careful not to scratch the Door surfaces.
4.When installing the Front Doors, make sure the door bolt holes are located on the hinge sides of the Cart Legs.
5.Install either Front Door by inserting 1/4"x5/8"
6.Repeat these steps to install the other Front Door.
7.Install the Cart Spice Basket to the inside of Left Door. Align the threaded holes on the inside of Left Door with the holes on the Cart Spice Basket. Tighten securely by using 2 of the 1/4"xl/2" Pattern Head Screws provided. See Fig.5b.
8.Install the Cart Spice Basket to the inside of Right Door. Align the threaded holes on the inside of Right Door with the holes on the Cart Spice Basket. Tighten securely by using 2 of the 1/4"xl/2" Pattern Head Screws provided. See Fig.5b.
•When you have finished assembling your grill we strongly urge that all Pattern Head Thumb Screws be tightened, either with the supplied Tightening Tool or a #2 Phillips Head Screwdriver.
Tightening Tool
Ref. # P05515102K
Figure 5a (NG gas model only)
BRACKET
Foundin
Hardware Pack
SHELF
Figure 5b (NG gas model only)
DOOR
BRACKET
UPPER DOOR
BOLT HOLE
FRONT DOOR
,LEFT DOOR_
HANDLE
CART SPICE
BASKETSHELF
| FRONT DOOR |
CART SPtCE | ,RIGHT |
BASKET |
|
15
