Kenmore 141.15337, 141.17337 owner manual Fuel Gauge Display lasts for approximately

Fuel Gauge Display Installation.

1.Open the front Doors of Cabinet. Pull out the LPG Tank Pull-out Tray. Connect the Wire Plug "A" from Fuel Gauge Display with the Wire Plug "B" from rear of Tank Pull-out Tray. Unscrew 1/4" x 1/2" Pattern Head Screw (Lower) from Rear Panel and fix Wire Plug "A" into Wire Fastener. Install Wire Fastener to

Rear Panel. Tighten securely using the same screw. See Fig.12a

Calibration Procedure.

1.Before installing batteries be sure the gas tank is not mounted in the tank pull-out tray.

2.From the backside ofthe Side Burner Frame, unscrew the Fuel Gauge Display Cover on the Fuel Gauge Display Box. See Fig.12b

3.Carefully remove the battery box from the back of the Fuel Gauge Display Box and insert two "AAA" batter- ies (provided). Be sure to follow correct poladtywhen inserting batteries.

4.Return the Battery Box with electric wire into the Fuel Gauge Display Box.

5.Screw the Fuel Gauge Display Cover onto the Fuel Gauge Display Box.

6.During calibration the Fuel Gauge Display shows the tank images of FULL and then EMPTY quickly.

IMPORTANT: When changing batteries be sure to remove the gas tank from the tank pull-out tray.

Fuel Gauge Display Operating - See Fig. 12c

Press the "CHECK" button to operate Fuel Gauge Dis- play with the gas tank mounted in the Tank Pull-Out Tray.

NOTE: Tank must be positioned in tray for Fuel Gauge Display check

1.Fuel Display: Indicates gas tank fill level.

2.FuelWarning Display: Whenthegastankfilllevel

is on the last row, a warning signal will sound for approximately 3 seconds to warn you that the tank volume is near empty.

3.Battery Warning Display: A low battery warning light will illuminate when the battery voltage drops to a low level. Replace the batteries.

NOTES:

Figure 12a

CART LEG

-WHEEL SIDE

REAR

WiRE

WiRE PLUG "A"

BURNER

FRAME

FUEL GAUGE

DISPLAY

TANK	PULL-OUT
TRAY	WiRE PLUG "B"

WiRE PLUG "A"

Figure 12b

FUEL GAUGE

DISPLAY COVER

FUEL

DISPLAY BOX

WIRE

AAA BATTERY

BATTERY BOX

IMPORTANT: When the gas tank is removed from the tank pull-out tray, the fuel gauge display will not operate.

Figure 12c

J FUEL INDICATOR_\

1. The Fuel Gauge Display lasts for approximately 20

seconds each time you press the "CHECK" button.

After 20 seconds, the Fuel Gauge Display turns off

automatically. If you press the button a second time

within 20 seconds, the Fuel Gauge Display will be

turned off manually. If you press the button a sec-

ond time after 20 seconds, the Fuel Gauge Display

wilt work and last for another 20 seconds.

FUEL Ay_

DISPL

BATTERY

BUTTON

FUEL

2. The Fuel Gauge Display works only with a tank on

the Tank Pull-Out Tray. No readout will appear if a

tank is not mounted on the Tank Pull-Out Tray.

WARNING

DISPLAYWARNING DISPLAY

21