Installing Cooking Components

Important: Before cooking on your grill the first time, wash the Cooking Grids and Cooking Rack with warm, soapy water. Rinse and dry thoroughly. Season with cooking oil regularly. After cooking is completed, turn grill to HIGH setting three to five minutes to burn off excess grease or food residue.

1.Place the three Flame Tamers on the lower ledge above Burners. See Fig. 11.

2.Evenly space the Cooking Grids on the ledge above the Flame Tamers.

3.Place the Secondary Cooking Rack into the slots on the upper left and upper right of Gril Bowl Side Panels. See Fig. 11.

4.Install the Smoker Drawer into the opening on

the upper left side of Control Panel. Slide the Smoker Drawer on the Smoker Drawer Bracket

inside grill.

Figure 11

SECONDARY

COOKING RACK

COOKING GRID

FLAME TAMER

SLOTSFOR

SMOKER

DRAWER

20

Page 20
Image 20
Kenmore 141.17337, 141.15337 owner manual Installing Cooking Components