Ifthe button is extremely thick, makea test buttonhole.
If itis difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder back to
create a gap _1_.
_1_Gap
S
\
•How to adjust buttonhole stitch density
Use the stitch length control (_0to adjust stitch density.
Turn the dial in direction _for a looser density_.
Turn thedial in direction (_for a tighter density _).
f
J
LENGTH \\\\
J
Ifthe sides of the buttonhole are not balanced, do the
following:
• Ifthe buttonhole looks like (_, use the screwdriver to
move the lever to the right (+) tomake the right side
of the buttonhole less dense (see illustration).
• Ifthe buttonhole looks like (_, use the screwdriver to
move the lever to the left (-) to make the right side of the
buttonhole denser.
Buttonhole pitch balance adjusting lever
F-
(_ \\\,
J
J
80