Kenmore 5303304549 manual Oven Cleaning, To Start the Self-CleanCycle

Oven Cleaning

(self-cleaning instructions, continued)

l Be sure to remove ever_hing from the oven and complete the suggested precteaning steps before setting the controls.

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for Fight soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results)

To Set the Controls:

t.Make sure the clock is set to the correct time of day

2.Push and hold START button until the control beeps and the words START

TIME appear in the left side of the display.

3, Turn SET knob clockwise until desired starting time is reached

.If you want the clean cycle to start now and shut off automatically, push START button, the control will beep once and the words STOP TIME will appear in the left side of the display. Then the word AUTO will come on to indicate that the clean cycle will begin immediately

4, If you want to start the clean cycle at a delayed time and shut off automatically, turn SET knob until stop time is 3 hours later than start time,, Example: If the start time and clock read 1:00, set the STOP TIME for 4:00. Push STARTbutton_ the control will beep once and the words STOP TIME will appear in the left side of the display. Then the word AUTO will flash continuously to indicate that the clean cycle will begin at a delayed time.,

5, To review start and stop time settings before automatic cycle begins, push and hold START button until START TIME appears; push second time to display STOP TIME and once more to return to automatic control mode,

.When changing start and stop times, time will increase and decrease in 5 minute increments

6.Turn the selector and temperature controls to CLEAN.

7.The motor driven lock wilt begin to close the oven door automatically and the oven cleaning light will come on as soon as the controls are set (It takes about t5 seconds for the lock to close the door)

8After the desired cleaning time has elapsed, the control wilt beep once and the word AUTO will stop flashing but stays on during cleaning

-To cancel automatic cleaning cycle, push the STOP/CANCEL button twice

oAt the end of automatic cleaning, the timer will sound for 3 seconds, AUTO will flash continuously to indicate end of automatic cycle. Alarm will continue to sound 1[2 second every !0 seconds for 15 minutes or until STOP/CANCEL button is pushed,

9 Turn the selector and temperature controls to OFF.

t0, The oven must now cool for about 1 hour or until the interior temperature has dropped below 550°F, Then the oven door will unlock and the oven cleaning light will go out, The oven door can now be opened

Use caution when

opening the door after the self-cleaning cycle, The oven may still be VERY HOT,

Note: Be sure to turn the Temperature and Selector Controls to OFF when the

self-cleaning cycle is completed.,

Stopping or Interrupting the Self-Clean Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:

1Push the CANCEL button twice. This will return the clock to the time of day 2, Turn the selector and temperature controls to OFF.

3 Allow the oven to cool until the oven cleaning light goes out Then the door unlocks and can now be opened

DO NOT force the door to open This can damage the door locking system, Use caution when opening the door after the self-cleaning cycle has been interrupted The oven may still be VERY HOT

4Correct the condition which caused the smoking

5Restart the self-clean cycle once all conditions have been corrected

12