Kenmore 5303304549 manual Occurrence

OCCURRENCE

SELF-CLEANING INSTRUCTIONS

Self-cleaning cycle does not work.

Soil not completely removed after self-cleaning cycle.

POSSIBLE CAUSE

Controls not set properly

Self-cleaning cycle was interrupted.

Failureto clean bottom, front top of oven, frame of oven or door area outside oven seal These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas

before the self-cleaning cycle is started.

Excessivespillovers in oven.

SOLUTION

Follow instructions under Oven

Cleaning (self-cleaning instructions).

Stop time must be set 3 to 4 hours past the start time

Follow steps under "Stopping or Interrupting the Self-Clean Cycle" under Oven Cleaning (self-cleaning instructions)

Burned-on residue may be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven seal

Set self-clean cycle for a longer cleaning time,.

Flames inside oven or smoking from , Excessivespiflovers in oven. vent.

This is normal, especially for pie spilfovers or for large amounts of grease on bottom of oven. Wipe up excessivespitlovers before starting cycle if flames or excessivesmoke is present, stop the self-clean cycle and follow steps under "Stopping or

Interrupting the Self-Clean Cycle" in the Oven Cleaning section

_9