Kenmore 721.88513, 721.88519, 721.88512 manual Glass Tray, Tones, Display Messages

GLASS TRAY

PROBLEM

The glass tray will not move.

TONES

PROBLEM

You do not hear the programming or end-of-cycle tone.

The audible tone has been disabled.

DISPLAY MESSAGES

PROBLEM

The display is flashing" : ".

CAUSE

•The glass tray is not correctly in place. It should be correct-side up and sitting firmly on the center hub.

•The support is not operating correctly. Remove the glass tray and restart the oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME ®. Cooking without the glass tray can give you poor results.

CAUSE

•You have not entered the correct command.

•Tone must be enabled.

CAUSE

•There has been a power interruption. Reset the clock. (See the "Clock" section on Page 10.)

If none of these items is causing your problem, call Sears Service at 1-800-4-MY-HOME ®.

44