Kenmore 790.4101 manual Consumer Defined Control, Silent control operation

Models: 790.4101

1 44
Download 44 pages 7.48 Kb
Page 19
Image 19

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The _._o_ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature

1. Press and hold _ for 3 seconds.

2.After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1).

PR ESS

DISPLAY

Qfor 3

seconds

Figure 1

To reactivate normal oven operation:

1.Press and hold _oP_)for 3 seconds. A beep will sound. The

"DOOR LOCKED" will flash in the display until the oven door has completely unlocked (Figure 2).

2.The wall oven is again fully operational.

Setting Silent Control Operation

Qfor 3

seconds

Figure 2

........iii

The DELAY TiME _

and FLEX CLEAN _

pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

PR ESS

DISPLAY

To change control from normal sound operation to

silent control operation

1.To tell if your range is set for normal or silent operation press

and hold _.

'....-- -- will appear and "DELAY" will flash in the

display (Figure 3). After 7 seconds "SP" (Speaker) will appear in the display (Figure 4).

2. Press _ to switch between normal sound operation and

silent operation mode. The display will show either "SP" (Figure 4) or ":--" (Figure 5).

If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":= -" appears (Figure 5), the control is in the silent operation mode.

3. Press : _sTAR':to accept the change or press _

to reject the

change.

Figure 3

G

for 7 seconds

Q

Figure 4

Figure 5

or

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

19

Page 19
Image 19
Kenmore 790.4101 manual Consumer Defined Control, Silent control operation