Setting Oven Controls

Setting the Clock

The _

pad is used to set the clock. The clock may be set for 12 or 24 hour time of day

operation. The clock has been preset at the factory for the 12 hour operation. When the range Jsfirst plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash (See Fig. 1).

 

 

 

iNSTRUCTIONS

 

PRESS

To set the clock (example below for 1:30)

 

1.

Press

@.

"CLO"

will appear in the display

(Figure 2).

0

2.

Press

(_

(_) @

pads to set the time

of day to 1:30

QQ@

(Figure 3). "CLO" will stay in the display. Press START"CLO"

will disappear and the clock will start (Figure 4).

Figure 1

DISPLAY

Figure 2

Changing between 12 or 24 hour time of day display

1. Press and hold _ for 7 seconds• "CLO" will appear in the

display. "12h" (Figure 5) or "24h" (Figure 6) appears in the display and the control beeps once.

2. Press _

to switch between the 12 and 24 hour time of day

display. The display will show either "12h" (Figure 5) or "24h" (Figure 6).

3. Press : START'to accept the change or press _

to reject the

change•

4.Reset the correct time as described JnTo set the Clock above• Please note that Jfthe 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours•

@

for 7 seconds

@

or(

@

Figure 3

_!ilZi>

!!!CI

iii;}i_'Zi

........iii

Figure 4

Figure 5

Figure 6

17

Page 17
Image 17
Kenmore 790.4101 manual Setting Oven Controls, Press, Display