Kenmore 790.7943 manual To set the Convection Convert feature, To Set Add 1 Minute Feature

Setting Oven Controls

Setting Convection Convert Feature

Setting Add 1 Minute Feature

To set the Convection Convert feature

The _ CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When

set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.

Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.

INSTRUCTIONS PRESS DISPLAY

Using Convection Convert feature to adjust oven temperature from a Bake recipe (example below when setting oven for 350°F):

1. Arrange interior oven racks and place food in oven.

Fig. 1

2. Press _'), (See Fig. 1). Ifa Cook Time or a Delay Start

is desired, enter the times now.

3. Press _. "CONV BAKE" and the oven set temperature

Fig. 2

adjustment will appear in the display (for this example it is 325°F). A beep will sound once the adjusted oven set temperature is reached. (See Fig. 2).

Notes: When used with a Cook Time or a Delay Start setting,

the Convection Convert feature will display a "CF" for check foodFig. 3 when the bake time is 75% complete (See Fig. 3). At this time the

oven control will sound 3 long beeps at regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long beeps every 30

seconds	until the _	pad	is pressed		(See Fig. 4).		Fig. 4
							('_
The oven icon will show a rotating fan within the square. This
rotating	fan icon indicates		when	the Convection		Fan is operating
(See Figs 2 or 3)							®
Press O	to stop Convection			Bake	or cancel	Convection Bake

at any time. Please allow the convection fan up to 6 minutes to activate. When the convection fan activates, a rotating fan icon will appear in the display (See Fig. 2).

Note: The minimum amount of cook time using the Convection Convert feature with a Cook Time or a Delay Start function is 20 minutes.

To Set	Add 1 Minute Feature
The @	keypad	is used to set additional		minutes to the Timer. Each time the @	pad is pressed, another minute is
added, if the Timer		is not active	and the @	key pad is pressed, the Timer feature	will become	active and will begin
counting	clown from	1 minute. When the Timer reaches the end of the set time, "End"			will display	and signal 3 long beeps
at regular	intervals until @		is pressed again.

24