Kenmore 790.7943 manual General Care & Cleaning, Changing Oven Lights

General Care & Cleaning

Changing Oven Light(s)

Changing Oven Light(s)

The oven lights automatically turn ON when the door is opened. The oven lights may also be manually operated by

pressing the d ',0_-pad. The oven light bulbs are located at the rear of the oven and are covered with a glass shield held

by a wire holder. The glass shields must be in place whenever the oven is in use.

Be sure the range is unplugged and all parts are COOL before replacing oven light. Weara leather-faced glove for protection against possible broken glass.

Wire

Holder

To replace the oven light bulb(s):

1.Turn electrical power off at the main source or unplug the range.

2.Press wire holder to one side to release the glass shield.

3.Replace bulb with a new 40 watt appliance bulb.

4.Replace glass shield over bulb and snap wire holder into place.

5.Turn power back on again at the main source (or plug the range back in).

6.The clock will then need to be reset. To reset, see Setting the Clock and Timer in this Use & Care Guide.

Please	Note: Models	are equipped	with either	1 or 2 interior oven	_I,,:C
lights.	The illustration	shows where	they would	be located,	iii_i:i

35