Kenmore 790.7943 When the Self=Clean cycle is done, Stopping or Interrupting Self=Cleaning cycle

Self=Cleaning

Setting Flex Clean or Delay Flex Clean

	INSTRUCTIONS		PRESS	DISPLAY
When the Self=Clean cycle is done:
1.	The time of day, "HOT",	"DOOR LOCKED" and "CLEAN" icon
	will remain in the display (See Fig. 7).
2.	Once the oven has cooled down for approximately		1 HOUR, and
	the "DOOR LOCKED" icon is no longer displayed, the oven			Fig.7
	door can then be opened.
Stopping or Interrupting		a Self=Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1 ,oss@			@

2.Once the oven has cooled down for approximately 1 HOUR and

the "DOOR LOCKED" icon is no longer displayed,the oven door	Fig.8
can then be opened (See Fig. 8).

iMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON.

2.A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 13 for instructions to set the control for the

24hour time of day display mode.

3O