Kenmore 790.7943 General Care & Cleaning, Removing & Replacing the Lift=Off Oven Door, locations

General Care & Cleaning

Removing & Replacing Lift-OffOven Door

Door Care Instructions

Care & Cleaning of Stainless Steel (some models)

	Removing & Replacing the Lift=Off Oven Door
	The door is heavy. For safe, temporary storage, lay the door flat
	with the inside of the door facing down.
Door Hinge	To Remove Oven Door:
] locations

FIII wl,.eve°deor1. Open oven door completely (horizontal with floor - See Fig. 1).

fully open	2.	Pull the door hinge locks on both left and right door hinges down from the
Y		oven frame completely towards the oven door (See Fig. 2). A tool such as a
		small flat-blade screwdriver may be required.
	3.	Firmly grasp both sides of oven door along the door sides (Do not use the
k
		oven door handle - See Fig. 3).
	4.	Close the door to the broil stop position (the oven door will stop into this
		position just before fully closing).

5. With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Fig. 4).

To Replace Oven Door:

1.	Firmly grasp both sides of oven door along the door sides (Do not use the
	oven door handle - See Fig. 3).
2.	Holding the oven door at the same angle as the removal position, seat the
	hook of the hinge arm over the roller pins located on each side of the oven
Fig. 2	door frame (See Fig. 4). The hook of the hinge arms must be fully seated
	onto the roller pins.
3.	Fully open the oven door (horizontal with floor - See Fig. 1).
4.	Push the door hinge locks up towards and into the oven frame on both left
	and right oven door hinges (See Fig. 2) to the locked position.
5.	Close the oven door.

Door Care Instructions

Most oven doors contain glass that can break. Read the following recommendations:

1.Do not close the oven door until all the oven racks are fully in place.

2.Do not hit the glass with pots, pans, or any other object.

3.Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Care & Cleaning of Stainless Steel (some models)

Some models are equipped with stainless steel exterior parts. Specia{ care and cleaning are required for maintaining the appearance of stainless parts. Refer to the Care & Cleaning Table for detailed cleaning instructions.

Fig. 4

33