TIME AND STATUS DISPLAY
The time and status display shows the estimated time remaining, cycle progress, and door lock status.
OESTIMATED TIME REMAINING
When the START/PAUSE is pressed, the washer automatically detects the wash load (weight) and optimizes the washing time, based on the selected cycle and options. The display will then indicate the estimated time remaining for the selected wash cycle.
NOTE:
•The time shown is estimated. For example, the time displayed may pause for a period of time while the machine is heating the water or balancing the load, Under certain conditions, the machine can pause for extended periods of time,
•Estimated time is based on normal operating conditions. Several external factors (room temperature, incoming water temperature, etc.) also affect the length of estimated time vs. actual time.
QLOAD-SENSING INDICATOR
This light will illuminate at the beginning of the cycle while the control measures the size of the load. Once the size
has been determined, the control will adjust the cycle for optimum performance. Estimated time remaining will not be displayed until the load size has been determined and may be different for each load.
_ CYCLE STATUS INDICATOR
These status LEDs illuminate to indicate which portion of the cycle is currently running. A blinking light indicates the active portion of the cycle. When that portion is complete, the light will remain steady.
_DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door will lock
while the washer is operating, The door can be unlocked by pressing the START/PAUSE to pause the washer.
NOTE:
•If the temperature in the washer is too high, the door cannot be unlocked until the washer has cooled.
•If the water level is too high, the door will not unlock. To drain the water, cycle the power OFF/ON, then press the spin speed button without selecting a cycle. Press start and the water will be drained and the clothes will be spun out. Do not try to force the door open, as it will damage the door.
18
