WARNING: To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire manual, including the Important Safety Instructions, before operating this washer.
CONTROL PANEL FEATURES
ii I
Vibration Guard
START/PAUSE
@ POWER (ON/OFF) BUTTON | _! CYCLE MODIFIER BUTTONS |
Press to turn the washer ON. Press again to turn the washer OFF.
NOTE: Pressing the POWER button during a cycle will cancel that cycle and any load settings will be lost. The door will unlock after a brief pause unless the water level or temperature is too high.
gCYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can be adjusted using the cycle setting buttons anytime before starting the cycle. (See the cycle guide on page 14 for allowable settings. To protect your fabrics, not all settings are allowed in all cycles.)
_ START/PAUSE BUTTON
Use these buttons to adjust the desired cycle options for the selected cycle. The lights above the buttons show the current selection. See page 19 for a complete description.
NOTE : Not all settings are available on all cycle selections. See chart on page 14 for details.
OSPECIAL CYCLE AND OPTION BUTTONS
These buttons are used to activate special cycles or options. See page 20 for details.
OTIME AND STATUS DISPLAY
The display shows the estimated time remaining, cycle status, and door lock status. See page 18 for a complete description.
_ DISPENSER
Press this button to start the selected cycle.
If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE : If you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns OFF.
Dispenser drawer. This drawer contains the compartments for detergent and additives. See pages 16
12
