Kenmore 911.94754 CAREAND CLEANING RemovablePartscont, at the top, Fully open, door, RackGuide

CAREAND CLEANING RemovableParts(cont.)

CLEANING MATERIALS

• Dishwashing detergent

. Warm water

°Scouring pad or soap-filled pad

RackGuide	-.1_	IHI
Raised Back	"_	fIf[
of the Rack __

TO REMOVE

1.Pull the racks out to the stop position,,

2.Pull up the front of the rack and slide under the bump of the rack guide

TO CLEAN

Clean with warm water and detergent For hard-to-remove stains, gently scrub with a scouring pad or a soap-filled pad Rinse well

TO REPLACE

I.Place the raised back of the rack onto the rack guides,

2.Lift the front of the rack until the raised back slides under the bump of the rack guides.

3.Slide the rack all the way back

TO REMOVE

1.	Fully open			the	Hinge Lock
	door				(Unlocked
	Push the hinge				Position)
2_
	locks		down
	toward		the
	door	frame,		to
	the	unlocked
	position,
	This	may
	require		a
	flat-blade
	screwdriver

Hinge Arm

. Firmly grasp both sides of the door

at the top

4_ Close door to the door removal position

5.Lift door up until

	the hinge arm is			I
	clear	of the	slot,
			Removal Position
TO REPLACE
.	Firmly	grasp	both	Bottom	Hinge
	sides	of the	door	Edge of	Arm
	at the top,			Slot

2_ With the door at

the same angle as the removal

position, seat the indentation

of the hinge arm into the bottom

edge of the hinge Indentation slot

continued on next page

3O