Kenmore 911.94759, 911.94754, 911.94752 manual Removable Parts, Careandcleaning

CAREANDCLEANING

Removable Parts

CLEANING MATERIALS

• Dishwashing		detergent
° Warm	water
° Soft cloth
			Molded
._	-_	/	Rib	Clear
-"._				Groove in

Spring

Clip

TO REMOVE

1.Be sure the control knob is in the off position

2.Pull straight off the stem

Using a piece of string can make removing the knob easier, Slip the string under and around the knob, pulling straight out

TO CLEAN

Wash the knob thoroughly with soapy water, Dry completely with a soft cloth, DO NOT let the knob soak.

TO REPLACE

1.Check the back of the knob, The molded rib of the knob is de-

signed to fit perfectly onto the knob stem

2, Align the molded rib to the clear groove in the knob stem.,

3.Push the knob back as far as it wilt go

r "¸ •

electrical power to the

_ AUTION: Disconnect oven at the main circuit

breaker or fuse box before attempting to replace the oven light bulb. Do not touch a hot light bulb with wet hands or a wet cloth. Wait until the bulb has cooled and use a dry cloth.

L. =4

Light Bulb

Bulb Cover

TO REPLACE

,Hold your hand under the bulb cover and firmly push back the bail wire, until it clears and releases the bulb cover.

2, Unscrew the light bulb,

3.Replace the bulb with a 31/2"

40-watt appliance bulb,

4.Place the bulb cover into the

grooves of the socket and pull the bait wire forward until it rests

in the indentation on top of the bulb cover

29