Kenmore 66578002700, W10166292A manual Electronic Oven Controls, Display, Cancel, Clock

Use the following chart as a guide for cookware material characteristics.

COOKWARE	CHARACTERISTICS
Aluminum	■ Heats quickly and evenly.
	■ Suitable for all types of cooking.
	■ Medium or heavy thickness is best for
	most cooking tasks.
Cast iron	■ Heats slowly and evenly.
	■ Good for browning and frying.
	■ Maintains heat for slow cooking.
Ceramic or	■ Follow manufacturer’s instructions.
Ceramic glass	■ Heats slowly, but unevenly.
	■ Ideal results on low to medium heat
	settings.

COOKWARE	CHARACTERISTICS
Copper	■ Heats very quickly and evenly.
Earthenware	■ Follow manufacturer’s instructions.
	■ Use on low heat settings.
Porcelain	■ See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel	■ Heats quickly, but unevenly.
	■ A core or base of aluminum or copper
	on stainless steel provides even
	heating.

ELECTRONIC OVEN CONTROLS

ABC DE

O	N	M	L	K	J	I H	G	F
A. Upper oven settings		F. Autoset				K. Cook & Hold
B. Oven display		G. Favorite setting				L. Clock
C. Upper oven light		H. Lower oven stop				M. Timer 2
D. Upper oven stop		I. Lower oven light				N. Timer 1
E. Number pads		J. Delay				O. Lower oven settings

Display

When power is supplied to the range or after a power interruption, the last clock time before power was interrupted will flash. See “Clock” section to set time of day.

Bake or Lock may flash rapidly in the display to alert you if there is an error or problem. Press STOP and reset clock if needed.

When the oven is in use, the display shows the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

Cancel

The Cancel pad stops any function except the Clock, Timer, Control Lock.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to 24-hour format:

1.Press and hold the upper oven STOP pad and FAVORITE pad for 3 seconds. “12 Hr” will flash in the display.

2.Press AUTOSET to select “24 Hr”; press again to select “12 Hr.”

3.Set the time of day by following the “To Set” instructions.

7