Kenwood CK 300 manual Oven Cooking, Ignition Of The Oven Burner

IGNITION OF THE OVEN BURNER

1)Open the oven door to the full extent.

WARNING: Risk of explosion! The oven door must be open during this operation.

2)Lightly press and turn the temperature

knob anti-clockwise (fig. 4.4) to the max

position ( fig. 4.1).

3)Press the knob firmly until the burner lights.

Never continue this operation for more than 15 seconds. If the burner has still not ignited, wait for about 1 minute prior to repeating the igni- tion.

In case of mains failure, press the knob firmly and immediately put a lit match or taper to the opening “F” (fig. 4.3).

4)Wait about 10/15 seconds after the burner lights before releasing the knob (time to prime the valve).

5)Close the oven door slowly and adjust the burner according to the power required.

If the flame extinguishes for any reason, the safety valve will automatically shut off the gas supply to the burner.

To re-light the burner, first turn the oven control knob to position ●, wait for at least 1 minute and then repeat the lighting procedure.

F

Fig. 4.3

Fig. 4.4

OVEN COOKING

Before introducing the food, preheat the oven to the desired temperature.

For a correct preheating operation, it is advisable to remove the tray from the oven and introduce it together with the food, when the oven has reached the desired temperature.

Check the cooking time and turn off the oven 5 minutes before the theoretical time to recuperate the stored heat.

12