ELECTRONIC CLOCK (fig. 5.2)
The programmer is equipped with an electronic clock with an illuminated dis- play which indicates hours and minutes. Upon immediate connection of the oven or after a powercut, three zeros will flash on the programmer panel.
To set the hour it is necessary to push
the 
button and then the 
or 
button until you have set the exact hour (fig. 5.2).
Another way is to simultaneously push
the 
two buttons and at the same time push the 
or 
button.
Note: The hour setting deletes any pro- gram.
NORMAL COOKING WITHOUT THE USE OF THE PROGRAMMER
To manually use the oven, that is, without the aid of the programmer, it is necessary to cancel the flashing AUTO by pushing
the button 
(AUTO will be switched off and the symbol 
will go on - Fig. 5.3).
Attention: If the AUTO is steadily lit (which means a cooking program has already been set), the program can be cancelled and switched to manual by pushing the button 
.
If the oven is switched on, you must switch off manually.
Fig. 5.3 |
20 |
ELECTRONIC TIMER
The timer program consists only of a buzzer which may be set for a maximum period of 23 hours and 59 minutes.
If the AUTO is flashing push the | but- | |||
ton. |
|
|
|
|
To set the time, push the | button and | |||
the | or | until you | obtain | the |
desired time in the panel (fig. 5.4). Having finished the setting, the clock hour will appear on the panel and the 
symbol will be lit.
The countdown will start immediately and may be seen at any moment on the panel
by simply pressing the button | . |
At the end of the time, the 
symbol will be switched off and an intermittent buzzer will go off; this can be stopped by pressing any of the buttons.
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
3 possible sounds can be selected by pressing the 
button.
A |
U |
T |
O |
Fig. 5.4 |
