Kenwood CK 680 manual Cleaning And Maintenance, Stainless Steel Surfaces, Enamelled Parts

Models: CK 680

1 36
Download 36 pages 58.34 Kb
Page 23
Image 23
6 - CLEANING AND MAINTENANCE

6 - CLEANING AND MAINTENANCE

Important:

Before cleaning or carrying out any maintenance disconnect the appliance from the electrical sup- ply and wait for it to cool down.

Attention

The appliance gets very hot, mainly around the cooking areas. It is very important that children are not left alone in the kitchen when you are cooking.

Do not use a steam cleaner because the moisture can get into the appliance thus make it unsafe.

STAINLESS STEEL SURFACES

The stainless steel front panels on this cooker (facia, oven door, storage compartment) are protected by a finger- print proof lacquer.

To avoid damaging this lacquer, do not clean the stainless steel with abrasive cleaners or abrasive cloths or scouring pads.

ONLY SOAPY/WARM WATER MUST BE USED TO CLEAN THE STAINLESS STEEL SURFACES.

ENAMELLED PARTS

All the enamelled parts must be cleaned with a sponge and soapy water or other non-abrasive products.

Dry preferably with a soft cloth.

Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel if left in contact for too long.

VITROCERAMIC COOKING HOB

– See page 12

REPLACING THE OVEN LIGHT BULB

Switch the cooker off at the mains. When the oven is cool, unscrew and replace the bulb with another one resistant to high temperatures (300°C), voltage 230 V (50 Hz), 15 W, E14.

Note: Oven bulb replacement is not covered by your guarantee.

23

Page 23
Image 23
Kenwood CK 680 manual Cleaning And Maintenance, Stainless Steel Surfaces, Enamelled Parts, Replacing The Oven Light Bulb