Kenwood CK 680 manual 230 V ~, Connecting The Feeder Cable, Feedeer Cable Section, “TYPE H05RR-F”

CONNECTING THE FEEDER CABLE	FEEDEER CABLE SECTION
To connect the feeder cable to the cooker	“TYPE H05RR-F”
it is necessary to:	230 V	3 x 6 mm2 (**)

– Remove the two screws that hold	(**) – Connection with wall box connection.
shield A behind the cooker.
	– Contemporaneity factor applied

–Open completely the cable clamp D.

–Insert the mains cable (type H05 RR- F) of minimum 6 mm2 section into the cable clamp D.

–Connect the phase and earth cables to terminal B according figure 8.2 and 8.3.

– Pull the feeder cable and block it with								Fig. 8.2
				230 V
the cable clamp D
– Re-mount shield A.			1	2	3	4	5
N.B. The earth conductor must be left
about 3 cm longer than the others.
				L1		N (L2) PE
		PE		Earth
		N		Neutral
		L		Live
								Fig. 8.3
		1	2		3	4	5
	B					N(L2)
			L1					PE
					230 V ~
D		Red			Black			Green
		or			or			and
		Brown			Blue			Yellow
Fig. 8.1	A	(Live)			(Neutral)			(Earth)
								33