INSIDE OF OVEN
This must be cleaned every time it is used.
Remove and refit the side runner frames as described in the next section.
With the oven warm, wipe the inside walls with a cloth soaked in very hot soapy water or another suitable product. The bottom of the oven, side runner frames, tray and rack can be removed and washed in the sink.
FITTING THE OVEN OUT
–Hang up the wire racks “G” on the oven walls interposing the self clean- ing panels “A” (fig. 6.1)
–Slide the required shelf and tray etc. in using the guides (fig. 6.2).
–Reverse the above order to dismantle.
ADVICE FOR USE AND MAINTE- NANCE OF SELF CLEANING PANELS
The self cleaning panels are covered with a special microporous enamel which, absorbs and removes oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven empty on max temperature for about 30 minutes.
These panels do not require to be cleaned, however it is advised to period- ically remove them from the oven (at least the side panels) and to wash them with tepid soapy water and then wipe off with a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH PRODUCTS CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the microporous enamel degrades, they can be turned to the other side.
24
A G
Fig. 6.1
Fig. 6.2 |
