Kenwood CT/KXF-W Timer operations, Timer playback of tape, Start playback, Set the timer

Timer operations

CT-2050/203/KXF-W6010/W4010 (En/M)

This unit incorporates a built-in timer standby function. By using an audio timer optionally available in the market, wake-up playback and unattended recording of tape can be started at any time of the day. Connect the power cords of the components directry or indirectly to the timer so that their powers can be turned on via the timer.

The timer setup operation varies depending on the timer. Also read carefully the instruction manual of your audio timer.

Audio timer

To AC outlet 23

Tuner

Preparation 1Set the power switches of the compo-	Amplifier
nents to ON.

2Set the input selector of the amplifier to

TAPE.

3Make "Playback (recording) preparation".

0	(CT - 2050/203/KXF - W6010/W4010)
(If relay playback is required, insert tapes
in both decks A and B.)
Timer playback of tape

1Start playback.

REVERSESTOPFORWARD

2 7 3

2Adjust the volume of the amplifier.

3Rewind the tape(s) to the start position.

1 Á￿

4Set the TIMER switch to PLAY.

TIMER

REC OFF PLAY

5Set the timer.

ÖSet the timer so that the tape starts at the desired time of the day.

ÖWhen the set time comes, tape playback starts automatically.

ÖRead carefully the instruction manual of your audio timer.

1. When connecting the KENWOOD equipment (amplifier, CD player) and the system, remove the disc from the CD player. 2. If relay playback is required, set to “[” or “Ò”.

Notes 3. If tapes are inserted in both decks A and B, timer playback starts with deck B.

4. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.)