Kenwood CT/KXF-W instruction manual Controls and indicators

Controls and indicators

CT-2050/203/KXF-W6010/W4010 (En/M)

1Deck A

This deck is used exclusively for play- back. (CT-203/KXF-W4010 only)

This deck is capable of both playback

	and recording. (CT-2050/KXF-W6010
	only)
2	Deck A eject (0) key	0
	Press to open the cassette holder of
	deck A.
3	Deck B eject (0) key	0

Press to open the cassette holder of deck B.

4Deck B

This deck is capable of both playback and recording.

5Deck A operation keys 0~! 1 : Rewind key (for fast winding of tape toward the left reel seen

from you)

	Á : Fast Forward key (for fast wind-
	ing of tape toward the right reel
	seen from you)
	2, 3 : Play keys
	7 : Stop key (Stop)
6	POWER switch	0
	Press to turn this unit ON and OFF.
7	PHONES jack	!
	Connect stereo headphones (optional)
	here.
8	TIMER switch	£
	This switch is used in setting of timer
	playback and timer recording.
9	MODE key	^

Press to change the recording level,balance,or bias settings.

0 Deck B operation keys 0~!

2, 3 : Play keys

7: Stop key (Stop)

1: Rewind key (for fast winding of tape toward the left reel seen

from you)

Á: Fast Forward key (for fast wind- ing of tape toward the right reel

seen from you)

PAUSE (8) key!

:Press to let tape transport pause temporarily.

REC/ARM (¦) key^ :Press in stop mode to start re- cording or press in record mode to let the recording pause after leaving a non-recorded blank of

4seconds.

!Deck A PAUSE (8) key (CT-2050/

KXF-W6010 only)!

Press to let tape transport pause tem- porarily.

@Deck A REC/ARM (¦) key (CT-2050/

KXF-W6010 only)^

Press in stop mode to start recording or press in record mode to let the record- ing pause after leaving a non-recorded blank of 4 seconds.

# RESET A key!

Press to reset the tape counter of deck

A to “0000”.
$ DOLBY NR key	0

Press to switch the Dolby Noise Reduc- tion mode to B =C =OFF. This makes it possible to use the Dolby NR effect in recording and playback.

9

% REV. MODE key 0

Press to change the tape transport di- rection.

^RELAY REC key (CT-2050/KXF-W6010

only)(

Press to perform continuous recording from deck A to deck B.

&DUBB. keys (NORM./HIGH) (CT-2050/

KXF-W6010 only)) DUBBING keys (NORMAL/HIGH) (CT-

203/KXF-W4010 only)		)
Press to start tape dubbing.
NORM./NORMAL
	: Dubbing at the normal
	speed.
HIGH	: Dubbing at a high speed.
* MPX FILTER key		&
Press to reduce beat noise when record-
ing FM broadcasts.
( CCRS key		ª

Press to start recording after automatic setting of the optimum CD recording level and optimum tape recording bias.

) AUTO BIAS key^

When this key is pressed, the bias level appropriate for the tape is set automati- cally for recording.

ÁRESET B key

Press to reset the tape counter of deck B to “0000”.

ªREC LEVEL/BAL./BIAS knob (CT-

2050/KXF-W6010 only)	^
Adjust this before recording.

£REC LEVEL/BAL. knob (CT-203/KXF-

W4010 only)	^
Adjust this before recording.