Kenwood CT/KXF-W Preparation for playback recording, Playback recording preparation

Preparation for playback (recording)

CT-2050/203/KXF-W6010/W4010 (En/M)

Before playback (recording)

10

1Set the TIMER switch to OFF.

TIMER

REC OFF PLAY

2Set the POWER switch to ON.

POWER

-ON ÐOFF

: Keys and control used in the operations described on this page.

Playback (recording) preparation

1Load a cassette tape in deck A or B.

1Press the eject (0) key.

0

2Insert a tape and close the cassette holder.

Deck A:	Deck B: Play-
Playback only. (CT-203/	back/recording
KXF-W4010 only)	available.
Playback/recording avail-
able. (CT-2050/KXF-W6010
only)

ÖBe sure to remove tape slack before insertion.

ÖThe type of tape, that is, the Normal, High position or Metal position (playback only) is selected automatically.

ÖThis unit cannot record sound on a Metal tape.

ÖBe sure to close the cassette holder securely by pushing it.

Normal position	TYPE
High position	TYPE
Metal position (playback only)	TYPE

AB

2Select the tape transport direction.

1Press the play (2 or 3) key.

2	7	3
To play (record)		To play (record)
tape side B.		tape side A.

Feed the tape section which cannot be played or recorded onto in the forward direction.

2Press the stop (7) key.

2 7 3

3Determine the playback (recording) condition.

1Select the playback (recording) mode.

REV.MODE

2Select the Dolby NR mode.

DOLBY NR

Tape transport direction indicators

The 2 and 3 indicators show the direction the tape is transported during recording or playback. The direction used when the tape is last stopped is held in memory even after this unit has been turned OFF, and the tape transport starts in the indicated direction when the unit is started automatically by a timer, etc. To change the tape transport direction, press the play key for the opposite direction and immediately press the stop (7) key.

Deck A direction indicators. Deck B direction indicators.

Each press switches the indication.

1 “[” :Double-side playback (recording) which stops tape stops after having played (or recorded) both sides.

2“Ó” :Playback is endless, but recording stops after having

recorded both sides.

3“Ò” :One-way playback (recording) which stops tape af- ter having played (or recorded) a single side.

Each press switches the indication.

1 DOLBY NR “OFF” (extinguished): Dolby NR is not used.

2DOLBY NR “B”: Noise reduction of the ordinary type.

3DOLBY NR “C”: Noise reduction with higher performance.

ÖSelect the Dolby NR mode according to the tape recording status.