Convenient CD recording (CT-203/KXF-W4010; Deck B only)
By connecting this unit with a KENWOOD "f", "Ä", " (Ä)", type amplifier (receiver) with a SYSTEM CONTROL jack and a KENWOOD CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on 21 the CD player can be started simultaneously.
Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording.
Preparation 1Complete the connections referring to
"System connections". | 6 |
2Make “Playback (recording) preparation”.
0
3(Load a disc in the CD player.)
: Keys and control used in the operations described on this page.
CD synchro recording
1Perform
ÖThe optinum bias is set in about 40 seconds, after which the deck enters stop mode.
AUTO BIAS
ÖFor a fine adjustment after setting AUTO BIAS, refer to the description of "Bias level adjustment".
the stop (7) key.
ÖRecording is possible even when the
2Adjust the recording level.
1Play a CD.
Press the 6 key of the CD player.
2Set the
8PAUSE ¦REC/ARM
ÖWhile pressing the PAUSE (8) key, press the REC/ARM (¦) key.
3Adjust the recording balance and recording level.
“How to record.” | ^ |
4Put the CD player in stop mode.
Press 7 key of the
CD player.
3Set the record-pause mode.
8PAUSE ¦REC/ARM
ÖWhile pressing the PAUSE (8) key, press the REC/ARM (¦) key.
4Start playing the CD.
Press the 6 key of the CD player.
ÖSynchro recording is not possible when tracks of more than one CD are programmed using a Carrousel type CD player.
ÖRecording starts at this moment.
ÖWhen the CD player has completed playback, the cassette deck stops recording and enters the stop mode.
To pause | : Press the 6 key of the CD player. | |
To restart recording | : | Press the 6 key of the CD player. |
To stop | : | Press the 7key of the CD player. |
ÖIf the stop (7) key of the cassette deck is pressed, the cassette deck enters the stop mode but the CD player does not stop.