Kenwood CT/KXF-W Bias level adjustment Deck B of the CT-2050/KXF-W6010 only, Start recording

lights up

4Start recording.

1Press the REC/ARM (¦) key.

CT-2050/KXF-W6010

¦REC/ARM

CT-203/KXF-W4010

Press once.

2Play the music source from the begin- ning.

How to record (CT-203/KXF-W4010; Deck B only)

CT-2050/203/KXF-W6010/W4010 (En/M)

17

ÖRecording will start.

ÖThe deck enters the stop mode automatically when the tape has been recorded till the end.

Bias level adjustment (Deck B of the CT-2050/KXF-W6010 only)

The MODE key can be used to adjust the bias level.

1Press the MODE key and select the "BIAS" mode.

MODE

2Adjust the bias level.

Each press of the MODE key changes the setting.

1 “LEVEL” lights up: Recording level setting mode

2“BAL.” lights up: Recording balance setting mode

3“BIAS” lights up: Recording bias setting mode (Deck B of the

CT-2050/KXF-W6010 only)

4“LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode lights up

REC LEVEL/BAL. /BIAS

°°￿

MIN/LMAX/R

The high frequency	The high frequency
decreases.	increases.

ÖTo adjust the bias level, play back the recorded sound and adjust to the suitable level.Repeat if necessary.

ÖThe bias can be adjusted to a value of ±3.

How to use the MPX FILTER key

Use this function when recording a radio (FM) broadcasts.

MPX FILTER

Depending on the tuner, a recorded FM broadcast may produce a “beat” sound. In this case, press the MPX FILTER key before recording. To cancel, press the MPX FILTER key again.