Help? Error

When the unit fails to operate correctly, the cause of the failure appears on the display.

"Protect" :

Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis.

➡Wire or insulate the speaker cord as appropriate and then push the Reset button.

"Hot Error" :

When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear.

➡Use the unit again after reducing the temperature inside the vehicle.

"Mecha Error" :

The disc player is malfunctioning.

➡Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected.

"Disc Error" :

An unplayable disc is inserted.

"Read Error" :

Disc is quite dirty.

➡Clean the disc, referring tot he section on <Handling discs> (page 4).

Disc is upside down.

➡Load the disc with the labeled side up.

"Region code Error" :

The disc you wanted to play has a region code that cannot be played with this unit.

"Parental level Error" :

The disc you wanted to play has a higher level than the parental level you set.

"Error 07–67" :

The unit is not operating correctly due to some reason or other.

➡Push the unit's Reset button. If the "Error 07−67" message does not disappear, see your nearest Kenwood dealer.

"No Device" (USB device) :

The USB device is selected as a source although no USB device is connected.

➡Change the source to any source other than USB/iPod. Connect an USB device, and change the source to USB again.

"Disconnected" (iPod, Bluetooth audio player) :

The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio player is connected.

➡Change the source to any source other than iPod/Bluetooth. Connect an iPod/Bluetooth audio player, and change the source to iPod/Bluetooth again.

"No Music" :

The connected USB device contains no playable audio file.

Media was played that doesn’t have data recorded that the unit can play.

"USB Device Error!!" :

The connected USB device is rated a current capacity higher than the allowable limit.

➡Check the USB device.

Some trouble may have occurred to the connected USB device.

➡Change the source to any source other than USB. Remove the USB device.

104 DNX series DNX7360BT/ DNX7360BTM