Setup Menu

EXT SW Setup

Sets up the exteral switch power mode.

1Display the EXT SW screen

Touch [] > [] > [System] > [EXT SW]. (page 67)

2Perform EXT SW Setup

[SW1 Name]/ [SW2 Name] Sets the name of the external device. See <How To Use the Character Entry Screen> (page 72) for information on how to enter a name.

[Output Pattern] Sets the power signal output mode.

( EXT SW1: Pulse, EXT SW2: Level)

"Pulse": Generates a single power signal pulse.

"Level": Continues output of high power signal.

Sets to turn output on/off each time the button on the EXT SW Control screen is touched. See <External Device Power Supply Control> (page 47).

[Pulse Set] Sets the Pulse signal output time.

Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set.

How To Use the Character Entry Screen

1

1Enters characters.

[2], [3] Shifts the cursor.

[5], [∞] Scrolls up or down the character button display.

[Shift] Toggles between uppercase and lowercase.

[qwe]/ [abc] Sets the key layout of the character buttons.

abc : Alphabetical key layout.

qwe : Qwerty key layout. [Clear] Clears the character.

If you erase a character, locate the cursor on it and touch this button.

[Space] Enters a space.

⁄

•You can enter characters only after you have applied the parking brake.

72 DNX series DNX7360BT/ DNX7360BTM