⁄

•See <About Picture files> (page 6) for readable image specifications.

•The [Memory] button on the “Background” screen becomes active only in STANDBY source mode.

•Pressing the [Memory] button on the “Background” screen switches the AV OUT source to OFF. For resetting the AV OUT source, refer to <AV Output Interface Setup> (page 80).

Panel Color Coordinate

DDX8 series : Sets the button illumination color.

DNX7/ DDX7 series : Sets the screen and button illumination color.

1Display the Color screen

Touch [] > [] > [Display] > [Color]. (page 67)

2Display the Panel Color Coordinate screen

[Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory.

[Panel Color Scan] When set to "ON", the illumination color of the screen and buttons changes one after another.

⁄

•When touching [SET] or [Initialize], make sure [Panel Color Scan] is set to "OFF".

3Select a color

1

1Sets to the touched color.

[Adjust] Sets and registers favorite color to the preset buttons ([P1] – [P3]).

To register your original color1Start the RGB coordinate2Adjust each color value

1

1Selects a preset number to register. [Red Value] Adjusts the Red value. [Green Value] Adjusts the Green value. [Blue Value] Adjusts the Blue value.

Next page 3

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM

English

75