[Synchronize] Sets the clock time in synchronization with the time data sent from the navigation system or the RDS station. ( DNX series: "Navigation", DDX series: "RDS")

"OFF"/ "RDS"*1/ "Navigation"

When the synchronized mode is set, the clock cannot be adjusted manually.

(*1 Region 2/ 3 models only)

Adjust the date or clock timeSecurity Setup

A red indicator will blink on the unit after the ACC is set to OFF, warning potential thieves.

1Display the Security screen

Touch [] > [] > [System] > [Security]. (page 67)

2Setup the SI (Security Indicator)

[SI] Turns the SI function on or off.

If turned "ON", the security indicator on the front panel flashes when the vehicle ignition is off. ( "ON")

Monitor Angle Control

You can adjust the position of the monitor.

1Display the Angle Setup screen

Touch [] > [] > [System] > [Angle]. (page 67)

2Set the Monitor Angle

1

1Sets the Monitor angle.

[Off Position] Stores the current monitor angle as the angle during power off.

[Auto Open] When turned on, the front panel is set to open automatically when the ignition is turned off, so that it can be detached for antitheft purpose.

( "OFF")

Next page 3

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM

English

71