Radio Listening

Various control screens appear in the Tuner Source mode.

•Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch> (page 92).

Source Control Screen

Switches to the source control screen to use various functions.

1Display the Source Control Screen See <How to Display the Source Control Screen> (page 18).

2Operation on the Source Control screen

1

2

 

[FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band.

[TI] Turns the Traffic Information function On or Off.

See <Traffic Information> (page 40). [4], [¢] Tunes in a station.

Use the [SEEK] to change the frequency switching.

2Display the Tuner Preset List Screen. See <Preset Select> (page 38).

1Information display "FM"/ "AM" Band display "Preset" Preset number "MHz"/ "kHz" Frequency display

[] When appears, the text display is scrolled by touching it.

Multi Function

[1/3] Switches the multi function display.

[] Closes the multi function bar.

[P1] – [P6] When [P1] to [P6] buttons appear, you can recall the stations on memory.

For memory of broadcasting stations, see <Auto Memory> (page 38) or <Manual Memory> (page 39).

[SEEK] Switches the Seek mode.

The mode is switched in the following order each time you touch the button.

Display

Setting

"AUTO1"

Tunes in a station with good reception

 

automatically.

"AUTO2"

Tunes in stations in memory one after

 

another.

"MANU"

Switches to the next frequency manually.

[AME] Selects the Auto Memory mode. See <Auto Memory> (page 38).

[PTY]*2 FM Searches station by program type. See <Search by Program Type> (page 40).

[MONO]*2 FM Select the Monaural reception.

Next page 3

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM

English

37