Set the Graphic Equalizer

DDX8 series

1

DNX7/ DDX7 series

1

1Gain level can be adjusted by touching the each frequency bar. [2], [3] Sets a frequency.

[5], [∞] Sets a gain level.

[EQ Init] Returns to the previous level which the gain level is adjusted.

[Flat] Tone curve becomes flat. [Bass EXT] Bass Extend settings.

When turned on, the frequency lower than 62.5 Hz is set to the same gain level as 62.5Hz.

[SW Level] Adjusts the subwoofer volume.

The setting is available when subwoofer is set to any item other than "None". See <Speaker Setup> (page 83).

Zone Control

You can set the front and rear audio source.

1Display the Zone Control screen

Touch [] > [] > [Zone Control]. (page 61)

2Set the Zone Control

[Single Zone] Sets the unit to single zone.

[Dual Zone] Sets the unit to dual zone. [Front Source] Sets the front audio

source.

[Rear Source] Sets the rear audio source.

⁄

•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.

[Rear VOL.] Adjusts the volume of the rear channel.

Next page 3

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM

English

63