You can select a speaker type and its size to get the best sound effects.
1Display the Speaker Select screenTouch [] > [] > [Audio SETUP] > [Speaker Select]. (page 67)
2Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically.
1
22
33
44
1Center speaker (DDX8 series)
2Front speaker
3Rear speaker
4Subwoofer
[Tweeter] You can set the tweeter when you are selecting front speakers.
If you are using a tweeter together with the front speakers, set the tweeter to "ON". In the "ON" position, the Equalizer is adjusted to its best position.
[X'over] Displays the Speaker Crossover Setup screen.
You can adjust the crossover setup that was set automatically when you selected the speaker type.
3Select a speaker typeYou can select any of the following speaker types.
"Center" None, 40x70 mm, 5 cm, 10 cm, 13 cm, 16 cm over
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" None, OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
⁄
•Select "None" if you have no speakers.
•If you set the center speaker to "None" even in a short time when you are setting the Surround Control to "Bypass+Center", the Surround Control is set to "Bypass" automatically. See <Surround Control> (page 66).
•If you set the center and rear speakers to "None" when you are setting the Surround Control
to "Dolby PL II", the Surround Control is set to "Bypass" automatically. See <Surround Control> (page 66).
Crossover Network SetupYou can set a crossover frequency of speakers.
1Select the speaker to set the crossover1
22
33
44
1Sets the High Pass Filter of the center speaker. (DDX8 series)
2Sets the High Pass Filter of the front speaker.
3Sets the High Pass Filter of the rear speaker.
4Sets the Low Pass Filter of the subwoofer.
Next page 3
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM | English | 83 |