Mask Key

If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.

When using the unit for the first time:

In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask key's signal.

If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off.

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the "Mask key" appears in the display.

Press the 4 button to search in the other direction.

3Hold down either the AM or FM button for two seconds or more.

"TRANSMIT 1" will appear in the display, indicating the setting mode has been entered.

4Hold down the transmit button on the Mask key until the full transmit level indicator lights up in the display.

"TRANSMIT 2" will be displayed.

Transmission part

Transmit button

NOTE

•Keep the Mask Key close to the signal sensor when you transmit the Mask Key’s signal.

•If the Mask Key’s signal does not be received correctly, the display will return to “TRANSMIT 1”. In this case, repeat the

procedure in step 4.

5Hold down the transmit button on the Mask key again until the full transmit level indicator lights up in the display. "APPROVED" will appear in the display, with the Mask key function turning on.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, “TRANSMIT 1” will appear in the display, indicating the setting mode has been entered. Repeat steps 4 and 5 above, and transmit the signal. You can start operating the unit again when "APPROVED" appears in the display.

— 33 —