Safety precautions

English

NOTE

•If you experience problems during installation, consult your Kenwood dealer.

•If the unit fails to operate properly, press the RESET button. When the faceplate is not visible, slide the manual open switch (as illustrated on p.7) for as many times as you have preset to make the faceplate control appear. The unit returns to factory settings when the RESET button is pressed. If the unit still fails to operate properly after the RESET button has been pressed, contact your local KENWOOD dealer for assistance.

•Press the reset button if the CD auto changer is first controlled and operates incorrectly. The original operating condition will return.

 

44W 4

 

 

 

EJECT

DISC

 

 

 

 

 

 

 

 

 

 

 

DISP

OFF

 

 

 

 

 

NAME.S

 

 

 

 

 

 

DAB

 

 

 

 

 

TI

 

 

 

RDM

 

 

VOL ADJ

 

LOUD

SCAN

REP

D.SCN

M.RDM

 

 

 

 

 

 

PTY

MENU DISC

Reset button

•Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C).

Mask key

If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.

When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal.

If this procedure is not carried out, the control panel of the unit will re-open in two seconds even with your vehicle's ignition turned off.

2CAUTION

Do not loose the "Mask Key".

If power is disconnected from the unit, correct operation can only be restored by the "Mask Key's" signal.

The "Mask Key" will also be required for service repair.

NOTE

If you send products in for repair that include a mask key, make sure to present the unit together with the mask key.

Cleaning the Unit

If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.

2CAUTION

Do not wipe the panel with a stiff cloth or a cloth dampened by volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off.

Cleaning the CD Slot

As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot.

Lens Fogging

Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer.

— 4 —