•Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit.

•During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off, unless “Manual Open Switch” at the rear of the faceplate is pressed in order to open it. You can prevent tampering of the unit when letting someone else drive your car by keeping it closed this way.

To cancel the forced closing of unit and open control panel: Slide the Manual open switch, as illustrated below, for as many times as you have preset in the "Manual Open Switch Setting "Open SW# / OPEN SW#" in the menu.

NOTE

When you set the Manual Open Switch setting to 2 or 3, slide the manual open switch successively. If you do not slide the switch successively, this cannot be verified correctly.

Manual open switch
Volume

Increasing Volume:

Press the ubutton to turn up the volume.

Decreasing Volume:

Press the dbutton to turn down the volume.

— 7 —