Other features

English

Function of the KDC-8070R/KDC-8070W/KDC-7070R

Contrast Adjustment

This adjustment permits easy viewing of the display.

To adjust the contrast:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Contrast Adjustment function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "Contrast ##" in the display, indicating that the Contrast Adjustment mode is on.

3Switching settings

Press either the AM or FM button.

Press the FM button to change the setting values higher, and press the AM button to change them lower. Settings may be made from 0 to 10.

4Press the MENU button to end the menu mode.

NOTE

The "##" display in the contrast adjustment mode will differ depending on the setting. The initial setting value is "5".

Adjusting Time

With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment.

Adjusting Time Automatically:

Tune into an RDS station for 3 or 4 minutes.

The time adjusts automatically to the correct local time.

NOTE

The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case.

Turning Automatic Time Adjustment On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Automatic Time Adjustment function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "SYNC ON" or "SYNC OFF" in the display, indicating that the Automatic Time Adjustment is on or off, respectively.

"SYNC ON" (Automatic time adjustment) "SYNC OFF" (Manual time adjustment)

3Switching settings

Press either the AM button or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

Adjusting Time Manually:

1Turn off the Automatic Time Adjustment as mentioned above.

2Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

3Press the ¢ button repeatedly until the "Clock Adj / Clock Adjust" appears in the display.

Press the 4 button to search in the other direction.

4Hold down either the AM or FM button for two seconds or more to enter the Time Adjustment mode.

The time display will blink.

5• Adjusting the hours

Press the FM button to advance the hours, or press the AM button to make the hours go back.

•Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

6Press the MENU button to end the menu mode.

— 32 —