Other features

English

Function of the KDC-PS9070R

Dual Zone System

The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode.

Turning the Dual zone system On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Dual zone system function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "Zone 2 ON" or "Zone 2 OFF" in the display, indicating that the Dual zone system function is on or off, respectively.

3Switching settings

Press either the AM or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

NOTE

•You must purchase the optional KCA-S210A/CA-C1AX/KDC- CPS82/KDC-CX82 device before you can use this function.

•You can choose to send the AUX input through the rear channel, and the unit’s tuner or CD source through the front channel.

•The Bass, Treble and Loudness adjustments do not affect the rear channel.

•When the Dual zone system is turned on, the External disc control features cannot be used.

•When you set the Dual zone system to on whilst the non-fading preout is switched on, the sound of the non-fading preout does not be outputted.

Faceplate Angle Adjustment

You can adjust the faceplate angle for easy viewing.

Adjusting faceplate angle:

Press the ¡ (EJECT) button to make the faceplate slide open, and then adjust the faceplate angle using the angle adjustment switch.

Adjustment may be made from 0 to 2.

0 1 2

0 1 2

2 0

1

NOTE

•Firmly slide the switch until it clicks.

•Do not apply excessive force to the faceplate under settings 1 or 2.

Manual Open Switch Setting

By sliding the Manual Open Switch during forced closing, you can open the control panel. Follow the directions below to preset the number of times that this switch needs to be slid in order to open the panel.

To preset the number of times to slide the Manual Open Switch:

1Press the MENU button for at least one second. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the Manual Open Switch Setting function appears in the display. Press the 4 button to search in the other direction.

The function setting is indicated by "Open SW # / OPEN SW #" in the display, indicating that the Manual Open Switch Setting mode is on.

3Switching settings

Press either the AM or FM button.

— 34 —