CD/External disc control features
English
Function of remote control with DNPP button
If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it.
1Press the DNPP button on the remote control.
"DNPP" will appear in the display, and the disc name preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to which you are currently listening are successively displayed for five seconds each.
In any of the units that are connected, discs that have not been disc name preset will display "NO NAME".
NOTE
•This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing.
•Discs in the disc changer that have never been played before will appear as "NO ACCES / NO ACCESS" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCES / NO ACCESS" display after inserting a disc magazine, try playing it using the disc scan or a similar function to display the disc name.
Also note that "NO DISC" will be displayed when a disc has not been loaded.
Rapid display (forward / reverse):Press the DISC+ or DISC– button.
Pressing the DISC+ button will rapidly display the preset names/disc titles in order.
Pressing the DISC– button will rapidly display the preset names/disc titles in reverse order.
2When the name appears for the disc you want to play Press the OK button.The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end.
To cancel DNPP mode:Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
Fast Forwarding and Reversing Disc PlayFast Forwarding Disc Play:Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes.
— 26 —