Basic operations
English
|
| SRC/ | FM ¢ |
d u |
| 4 POWER OFF | |
| 44W 4 | EJECT | DISC |
|
|
| |
|
| DISP | OFF |
|
| NAME.S | |
|
| DAB | |
|
|
| |
|
| TI |
|
LOUD | SCAN | RDMREPD.SCAN M.RDM VOL ADJ |
|
|
| PTY | MENU DISC |
ATT/LOUD |
| MENU AM |
KDC-PS9070R
LOUD indicatorKDC-8070R/8070W/7070R
ATT indicatorLOUD indicator
You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio.
Power ON/OFF:When you turn your vehicle’s ignition on, the unit’s power will also turn on, with the faceplate reversing to show the control panel.
When you turn your vehicle’s ignition off, the faceplate will reverse to hide the control panel, and the unit’s power will turn off.
NOTE
•After installation of your Mask unit, be sure to transmit the "Mask Key's" signal to deactivate the demonstration mode.
If this procedure is not carried out, the control panel of the unit will
•When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove the unit.
•When the moving faceplate is hit by an object, it will stop and return to its original state. Remove the object and repeat the action.
Using the Unit in Vehicles with Covered Consoles•Make sure the console is uncovered whilst the faceplate is reversed.•Do not exert any excess force on the movable parts of the unit, including the faceplate, as it can cause failure in the unit’s mechanism.
Hiding the unit with the ignition turned on (forced closing): Hold down the SRC button for one second or more.
The faceplate will reverse, hiding the unit. The unit will turn off.NOTE
•When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly.
— 6 —