Display Type F

G-Analyzer display Selection

Changing the G-Analyzer display.

⁄

•Before alternating G-Analyzer display, you are required to setup <G-Counter Level seting> (page 17), <G-Analyzer Calibration setup> (page 18), <G-Analyzer vehicle weight setup> (page 18) and <G-Analyzer vehicle class setup> (page 18).

1 Enter G-Analyzer display selection mode Using the Control knob, select "DISP" > "GMENU".

For the operation method, refer to <Function Control mode> (page 10).

2Select the G-Analyzer display Turn the Control knob.

Select from the following displays.

G-Force Sensor display

G- Graphic display 1 – 2

G-Meter display (Graphic)

G-Meter display (Text)

G-Counter display

⁄

•G-Graphic display

Displays the condition of G in horizontal direction (e.g; when turning the curve) by the graphic.

•G-Meter display (Graphic)

Displays the maximum value of acceleration G, right direction G, and left direction G by the numerical value.

•G-Meter display (Text)

The maximum value of acceleration G, right direction G, and left direction G is displayed by the numerical value. The value of G is only the reference, so is different from the actual value.

•G-Counter display

Adds the point of the acceleration level. The point is determined after a lapse of 1 hr drive or at power off (ACC Off), and then it will be displayed by the graph.

Furthermore, the G-Counter displays the average of the past data by the line. (The scale of graph is determined along with the largest point among the past 10 data.)

•The value of G-Meter display and G-Counter display can be reset by <G-Analyzer Reset> (page 17).

3Exit G-Analyzer display selection mode Press the Control knob.

English 15