Menu system
FNC | SRC Control knob |
Function icon
Menu System
Setting beep sound during operation, etc. functions.
The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation.
1Enter Menu mode
Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode> (page 10).
2Select the menu item
Turn the Control knob or push it towards up or down.
Example: When you want to set the beep sound select the "Beep" display.
3Set the menu item
Push the Control knob towards right or left. Example: When you select "Beep", each time you
push the knob it alternates between "Beep : ON" or "Beep : OFF". Select 1 of them as the setting.
32 English
You can continue by returning to step 2 and setting other items.
4Exit Menu mode Press the [FNC] button.
⁄
•When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.)
Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc.) are entered step by step.
•Three menu items appear on the display. The menu item displayed at the center is the one you can adjust.