Troubleshooting Guide
?No sound can be heard, or the volume is low.
✔The preset broadcast station is not transmitting in the mode that was set with <Receive mode Setting> (page 37).
☞Please set <Receive mode Setting> to "Auto".
✔In digital AM broadcasting, receive mode switches between stereo and monaural too often.
☞Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad.
✔HD Radio tuner is connected to
☞Connect the HD Radio tuner directly to this unit.
USB device source?The USB device is not detected.
✔The USB connector is disconnected.
☞Connect the connector of the USB device properly.
?The USB device does not play its audio files.
✔The USB connector is disconnected.
☞Connect the connector of the USB device properly.
Eject: | • No disc magazine has been loaded in |
| the changer. The disc magazine is not |
| completely loaded. |
| • No CD in the unit. |
No Disc: | No disc has been loaded in the disc |
| magazine. |
TOC Error: | • No disc has been loaded in the disc |
| magazine. |
| • The CD is quite dirty. The CD is upside- |
| down. The CD is scratched a lot. |
Read Error: | • The number of files or folders which are |
| stored in the connected USB device is above |
| the limitation. |
| • The file system of the connected USB device |
| is broken. |
| ➪ Copy the files and folders for the USB |
| device again referring to http://www. |
| kenwood.com/usb/. If the error message is |
| still displayed, initialize the USB device or |
| use other USB devices. |
Error 05: | The disc is unreadable. |
Blank Disc: | Nothing has been recorded on the MD. |
No Track: | No tracks are recorded on the MD, although it |
| has a title. |
Error 15: | Media was played that doesn’t have data |
| recorded that the unit can play. |
No Panel: | The faceplate of the slave unit being |
| connected to this unit has been removed. |
Error 77: The unit is malfunctioning for some reason.
➪Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center.
Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
➪Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center.
48 English