Category and Channel Search
Selecting the channel and category you want to receive.
1Enter Category and Channel Search mode Press the Control knob.
2Select the Category
Push the Control knob towards up or down.
⁄
•It is the item when the category of Middle text display part is selected.
3Select the Channel
Push the Control knob towards [4] or [¢].
⁄
•You cannot Channel search until the category information is acquired.
Cancelling Category and Channel Search mode Press the Control knob.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
2Enter the channel
Press the number buttons.
3Do Channel Search
Push the Control knob towards [4] or [¢].
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
⁄
•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.
•If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears.
Selecting the Preset Band
Push the Control knob toward [FM].
Each time you push the knob, the preset band alternates between the SR1, SR2, SR3 and SR4.
Channel Preset Memory
Putting the channel in the memory.
1Select the preset band
Push the Control knob toward [FM].
2Select the channel to put in the memory Push the Control knob towards [4] or [¢].
3Enter Preset Memory mode
Using the Control knob, select "P.MEM". For the operation method, refer to <Function Control mode> (page 10).
4Select the number to put in the memory Turn the Control knob.
5Determine the number to put in the memory Press the Control knob.
6Allow the determined number to take effect Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
⁄
•Only the channel number is stored. Category information is not stored.
•This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button for at least 2 seconds.
English 29