In Standby mode
Date Mode
Setting the date format.
1Select Date Mode Turn the Control knob. Select the "Date Mode" display.
2Enter Date mode
Press the Control knob for at least 1 second.
3Select the date format
Turn the Control knob or push it towards up or down.
4Exit Date mode
Press the [FNC] button.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI : ON" | LED flashes. |
"DSI : OFF" | LED OFF. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"Display : ON" | Keeps the display on. |
"Display : OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
⁄
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 40) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"Dimmer : ON" | The display dims. |
"Dimmer : OFF" | The display doesn’t dim. |
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP : ON" | The |
"AMP : OFF" | The |
English 35