Kenwood KDC-MP635 Audio Preset Memory, Audio Preset Recall, Enter Menu mode, Enter Menu mode, 2Enter Menu mode, 2Enter Menu mode, 1Setup Sound Control, Enter Audio Preset mode

Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 8)

-<Audio Setup> (page 9)

2Enter Menu mode

Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode> (page 10).

"MENU" is displayed.

3Select Audio Preset mode Turn the Control knob.

Select the "Audio Preset" display.

4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset Memory Turn the Control knob.

Select the "Memory" display.

6Determine whether to put the Audio Preset in the memory

Press the Control knob. "Memory?" is displayed.

7Put the Audio Preset in the memory Select "YES" using the Control knob. "Memory Completed" is displayed.

8Exit Audio Preset mode Press the [FNC] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered.

Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume

Other than Standby mode

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 39).

1Select the source Press the [SRC] button.

Refer to <Selecting the Source> (page 7).

2Enter Menu mode

Using the Control knob, select "MENU". For the operation method, refer to <Function Control mode> (page 10).

"MENU" is displayed.

3Select Audio Preset mode Turn the Control knob.

Select the "Audio Preset" display.

4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset Recall Turn the Control knob.

Select the "Recall" display.

6Determine whether to recall the Audio Preset Press the Control knob.

"Recall?" is displayed.

7Recall the Audio Preset

Select "YES" using the Control knob. "Recall Completed" is displayed.

8Exit Audio Preset mode Press the [FNC] button.

⁄

•The User memory of "SYSTEM Q" in <Audio Control> (page 8) is changed to the value which was recalled.

•The source tone memory item of <Audio Control> (page

8)is changed to the value which was recalled by the selected source.

English 39